Placing The Cooking Components; Lid Stopper & Bucket; Cooking Components & Power - Pit Boss PB820FBC Instrucciones Y Recetas

ASSEMBLING THE LID STOPPER
Parts Needed:
8 - Lid Stopper
Hardware Required:
Screw 1/4" - 20* 3/5" x1 (found in barrel)
INSTALLATION STEPS
• Slip the Lid Stopper front lip into the slot provided. Located at
the top of the barrel in the middle.
• Using the screw driver, secure the Lid Stopper to the barrel with
one 1/4" - 20* x 3.5" screw (AA). Take care not to over-tighten.
ATTACHING THE GREASE BUCKET
10
All manuals and user guides at all-guides.com

PLACING THE COOKING COMPONENTS

COOKING GRIDS
Your Pit Boss grill comes with cast iron main cooking grids. Cast iron is
an excellent heat absorber and is still the best way to produce those
"steak house" sear markings.
Note: to maintain the searing and grilling performance of your
cooking grids, as well as their longevity, some special care and
maintenance is required as with any cast iron cooking tools.
UPPER COOKING RACK
Place this porcelain coated steel grid on top of the two brackets
found on either end of the barrel.
Parts Needed:
1 - Upper Cooking Rack
2 - Cooking Grids
3/4 - 2 pc Flame Broiler