Basic Operation; System Setup - Rexing H6 Manual Del Usuario

and humidity. Please notice protection for the camera when
using it outdoor.
♦ If the capacity of memory card is full, the camera will stop
recording automatically and the LEDs will go out.
♦ Press the edge of the card gently to pop-up the TF card.

Basic Operation

Turn On And Off The Camera
Switch the Mode Button to "Test/On" to turn on the camera.
Switch the Mode Button to "Off" to turn off the camera.

System Setup

Switch Mode Button to "Test", then you can set the system
parameters.
1. Press Video/Photo button to switch between these two
modes.
2. Press Menu button to open the setup menu.
3. Press Up/Down button to scan all menu. Then press OK
button to enter the options interface.
4. Press Up/Down button to scan all options. And press OK
button to confirm options.
5