Pair With A Bluetooth Device; Connect Speaker To Another Bluetooth Device - Targa SilverCrest SLM 10 C1 Manual De Instrucciones E Instrucciones De Seguridad

SilverCrest SLM 10 C1
9.2 Pair with a Bluetooth
The AUX IN socket (8) must not be used during the coupling
process.
The Bluetooth
Enter '0000' if you are asked for a PIN during the pairing
process.
The connection may take a long time to establish, depending
on the device used.
•
Set your Bluetooth
available Bluetooth
instructions of your Bluetooth
•
Briefly press the on/off button
series of beeps will sound and then the power/charging LED (12)
will flash blue. Coupling mode is now active.
•
Select device SLM 10 C1 from the list of found devices to pair the
two devices. A series of beeps will sound and the power/charging
LED (12) will light up blue twice once the connection is successful.
•
Now, start playback on your Bluetooth
the connected speaker, during which the power/charging LED (12)
slowly flashes blue.
•
Hold down the on/off button
end the Bluetooth
power/charging LED (12) will switch off.
9.2.1 Connect speaker to another Bluetooth
To connect the currently connected speaker to another Bluetooth
device, the existing connection must first be disconnected by pressing the
44 - English
®
device
®
device name of the speaker is SLM 10 C1.
®
device, such as your smartphone, to search for
®
devices nearby. Please consult the operating
®
device.
(1) for approximately 3 seconds to
®
connection. A series of beeps will sound and the
(1) to switch the speaker on. A
®
device. Playback occurs via
®
device
®