Cleaning - Targa SilverCrest SLM 10 C1 Manual De Instrucciones E Instrucciones De Seguridad

can have a negative impact on the reception range. Reduce the
distance between the devices, if necessary.
•
Check that the Bluetooth
device that is providing the audio. Activate the Bluetooth
necessary.
•
If a 3.5 mm cable is plugged into the AUX IN jack (8), remove it,
because the Bluetooth
in.
•
Make sure that a previously paired connection with another
®
Bluetooth
connection and reconnect to the desired audio source.
No sound
•
Increase the volume of the speaker. In AUX IN mode, increasing the
volume on your playback device can also solve the problem.
You notice limitations in functionality
•
This problem may be related to the software of your Bluetooth
device not being up to date. If necessary, try to update the software
version. Please consult the operating manual of your Bluetooth
device.

11. Cleaning

•
Do not allow moisture to enter the speaker or the connection socket.
Keep the appliance lid (9) closed during cleaning.
•
Clean the speaker with a slightly damp, soft cloth only.
•
Do not use abrasive, scouring or solvent-based cleaning agents. The
surfaces of the speaker can be irreparably damaged.
®
®
feature does not work if a cable is plugged
device is no longer active. If necessary, disconnect the
feature is enabled on the Bluetooth
SilverCrest SLM 10 C1
®
feature, if
English - 49
®
®
®