Fein MSfo870-1d Instrucciones De Uso página 18

OBJ_BUCH-0000000342-001.book Page 18 Wednesday, March 6, 2019 3:14 PM
en
18
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the auxiliary handle
(figure 3).
Depending on the working manner, screw
the auxiliary handle right or left on the power
tool.
Mounting the wheel guard (figure 4).
For all work except for cut-off
WARNING
grinding.
Loosen the clamping screw.
Mount the wheel guard.
Turn the wheel guard to the requested work-
ing position, then clamp the wheel guard with
the clamping screw.
Mounting the cut-off wheel guard (figure 5)
For cut-off grinding opera-
WARNING
tions, always work with the
cut-off wheel guard mounted.
Mounting takes place as described under
"Mounting the wheel guard".
Fig. 3
Fig. 4
Wheel guard
Clamping screw
Fig. 5
Auxiliary handle
Wheel guard