Fein MSfo870-1d Instrucciones De Uso página 5

OBJ_BUCH-0000000342-001.book Page 5 Wednesday, March 6, 2019 3:14 PM
MSfov852-1, MSfov852-1-180:
This power tool is to be used as a grinder.
Observe all safety warnings, instructions,
illustrations and data supplied with the power
tool. Non-observance of the following
instructions can lead to electric shock, fire
and/or serious injury.
This power tool is not suitable for sanding
with sanding sheets, working with wire
brushes, polishing and cutting. Applications,
for which the power tool is not intended for,
can lead to hazardous situations and injury.
MSf843-1b, MSfo849-1b:
This power tool is to be used as a sander.
Read all safety warnings, instructions, illus-
trations and specifications provided with this
power tool. Non-observance of the following
instructions can lead to electric shock, fire
and/or serious injury.
This power tool is not suitable for grinding,
working with wire brushes, polishing and cut-
off grinding. Applications, for which the
power tool is not intended for, can lead to
hazardous situations and injury.
MSf843-1a:
This power tool is intended to function as a
polisher. Read all safety warnings, instruc-
tions, illustrations and specifications pro-
vided with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Operations such as grinding, sanding, wire
brushing or cutting-off are not recommended
to be performed with this power tool. Opera-
tions for which the power tool was not
designed may create a hazard and cause per-
sonal injury.
Do not use accessories which are not specifi-
cally designed and recommended by the tool
manufacturer. Just because the accessory can
be attached to your power tool, it does not
assure safe operation.
The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool. Accessories running faster
than their rated speed can break and fly apart.
The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or
controlled.
Application tools with threaded inserts must
match the grinder spindle thread. For acces-
sories mounted by flanges, the arbour hole of
the accessory must fit the locating diameter
of the flange. Accessories that do not match
the mounting hardware of the power tool will
run out of balance, vibrate excessively and
may cause loss of control.
Do not use a damaged accessory. Before each
use inspect the accessory such as abrasive
wheels for chips and cracks, backing pad for
cracks, tear or excess wear, wire brush for
loose or cracked wires. If power tool or acces-
sory is dropped, inspect for damage or install
an undamaged accessory. After inspecting
and installing an accessory, position yourself
and bystanders away from the plane of the
rotating accessory and run the power tool at
maximum no-load speed for one minute.
Damaged accessories will normally break
apart during this testtime.
Wear personal protective equipment. Depend-
ing on application, use face shield, safety
goggles or safety glasses. Where appropriate,
wear dust mask, hearing protectors, gloves
and workshop apron capable of stopping
small abrasive or workpiece fragments. The
safety glasses must be capable of protecting
against flying particles generated by the vari-
ous operations. Prolonged exposure to high
intensity noise may cause loss of hearing.
Keep bystanders a safe distance away from
work area. Anyone entering the work area
must wear personal protective equipment.
Fragments of workpiece or of a broken acces-
sory may fly away and cause injury beyond
immediate area of operation.
Hold the power tool by insulated gripping sur-
faces only, when performing an operation
where the cutting accessory may contact hid-
den wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
Position the cord clear of the spinning acces-
sory. If you lose control of the power tool,
the cord may be cut or snagged and your hand
or arm may be pulled into the spinning acces-
sory.
en
5