Device elements
1 Fleece filter bag
2 Suction support
3 Suction hose
4 Cable hook
5 Carrying handle
6 Power cord
7 Mains plug holder
8 Storage compartment for hoses
9 Suction head lock
10 Suction head
11 Steering roller
12 Dirt receptacle
13 Nameplate
14 Pickup for floor nozzle
15 Socket for electric vacuum brush
16 Main switch
17 Floor nozzle
18 Adjustable telescopic suction pipe
19 Dusting brush
20 Upholstery nozzle
21 Crevice nozzle
22 Lid lock
23 Cover
24 Telescopic suction pipe
25 Suction force regulator (continuous)
26 Bender
27 Exhaust filter
28 Filter casing
29 Main filter basket
30 Motor protection filter
Colour coding
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
Start up
Check whether main filter basket has
been inserted into the appliance.
Operating modes
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
Installation of the filter bag
Release and remove the suction head.
Remove the main filter basket.
Install the fleece filter bag or the paper
filter bag (option).
Insert main filter basket.
Insert and lock the suction head.
Turning on the Appliance
Plug in the mains plug.
Switch on the appliance at the main
switch.
Cleaning operations
Regulate the suction force on the suc-
tion force regulator (continuous).
Perform the cleaning operation.
Turn off the appliance
Switch off the appliance at the main
switch.
Pull out the mains plug.
After each operation
Empty the container.
Vacuum and wipe the appliance inside
and outside with a damp cloth.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
– 2
EN
Operation
Transport
11