Care And Maintenance - Laica HYDROSMART VENEZIA Instrucciones Y Garantía

Ocultar thumbs

página de 39

/ 39
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

VENEZIA tap filter

6) Proceed as follows to install the body of the filtering system with the adapter M:

- Remove the fastening ring from the body of the filtering system and take the adapter L with a diameter of Ø 21 mm,

plus the seal N, and assemble the three pieces as illustrated in figures 6A, 6B, 6C.

- Loosen the fastening band with a flat head screwdriver and remove the two rubber seals inside the adapter M (fig.

7A, 7B).

- Choose the best seal: only the one with the biggest diameter (Fig. 8A) or both with one inserted inside the other

(fig. 8C). Then, insert them in the adapter, pressing firmly and taking extra care over which way up they are inserted

(fig. 8D).

- Install the adapter M on the tap and tighten the fastening band using a flat

head screwdriver to secure it firmly to the tap (fig. 9A and B).

7) Remove the HYDROSMART™ filter from its bag and rinse it under running water. Now, attach the filter to the body

of the device as shown in figures 11A, 11B, 11C.

11A

11B

- Screw the body of the filtering

system to the ring (fig. 10).

11C

Instructions and guarantee

ACTIVATING THE FILTER LIFE MANUAL INDICATOR

Turn the manual indicator of the filter life D to set the start

month of using the filter. The reference month must be

lined up with the O line.

SMART FILTRATION SYSTEM – FREE LAICA HOME

WELLNESS APP - USE

List of compatible devices:

• iOS: iPhone with version 10 operating system.

• For devices with Android™ operating system: from

version 6.0 (Marshmallow).

By adding the HYDROSMART™ filter to the free "Laica

Home Wellness" app, you can receive automatic notification

on your smartphone when to replace the filter.

1. Install the free "Laica Home Wellness" app on your

smartphone.

2. Start the app and enter the "FILTER" section from the

main screen.

3. Add the HYDROSMART™ FILTER by pressing the

"+" key. It is possible to add the filter by scanning

the QR code printed on the upper part of the filter or

manually by pressing the "Select manually" button.4.

The app adds the filter and automatically prompts the

replacement date. To optimise the effective duration of

the filter based on the water treated, you can select the

chlorine level in your water supply. To use it properly,

request further information from your water supplier or

carry out a preliminary assessment of the local water

supply.

5. Save the settings by pressing the

key.

6. When the filter replacement date is reached, the

notification to replace it will appear on your smartphone.

The notification is also sent to the email address given

during registration.

• To scan the QR code on the upper part of the filter, you

must authorise the app to access to your smartphone

camera.

• To receive notifications when to replace the filter, you

must enable the settings on your smartphone.

• To replace the filter, you can add a new one by scanning

the QR code printed on the upper part of the filter or

by updating the expiry date by clicking on the "Filter

expired" button (click to replace)".

USING THE FILTERING SYSTEM

Activating the Laica HYDROSMART™ filter:

When first used and every time the HYDROSMART™

filter is changed, turn the tap on and allow the water to

flow through the filter for several minutes (at least 4-5

minutes) to correctly activate the materials of which the

filter is composed.

This water can be used for watering plants. If the Laica

filtering system has not been used for 24 hours or more,

allow the water to flow for 30-60 seconds before using

the filtered water again.

CAUTION:

- To guarantee the performance characteristics of the

filtering system, it is recommended to filter cold water

only.

- The flow of water at a temperature higher than 50°C

through the device may cause permanent damage. The

flow of water at a temperature higher than 35°C through

the filter may cause permanent damage.

- To adjust the water flow properly, open the tap slowly.

The Laica filtering system has 3 different ways of

dispensing the water which can be selected with the

selector C:

1) Filtered water for

drinking, washing

fruit and vegetables,

cooking and carry out

all routine tasks with

safe, pleasant tasting

water.

2) Unfiltered water with

spray head.

3) Unfiltered water with

continuous stream.

REPLACING THE FILTER

To replace the filter, turn the filter anticlockwise and

remove it by pulling it outwards (fig. 12A, 12B, 12C).

12A

12B

12C

Replace it with a new filter repeating the steps described

in point 7 of the paragraph "PREPARING THE FILTERING

SYSTEM", "ACTIVATING THE FILTER LIFE MANUAL

INDICATOR" and "USING THE FILTERING SYSTEM -

Activating the Laica HYDROSMART™ filter".

To achieve the best results and guarantee the safety of

the filtering system, we recommend replacing the filter

every 3 months or 900 litres of filtered water.