4-4.VIdeo; 4-4-1.TEsting Wiring On Installed Coax Cable - Temper KCM-RJ-0767493 Instrucciones De Operación

4-4.Video

Testing Wiring on Coax Patch Cables Terminated with F Connectors.
Note: Test signals in the Video mode may not pass through a splitter. Only one remote ID can be
connected at a time when testing cables connected to a common splitter.
Tester

4-4-1.Testing Wiring on Installed Coax Cable

1.Connect a known good patch cable to the F connector on the tester.
2.Connect the other end of the patch cable to the wall port or patch panel connected to the cable
under test.
3.Connect a numbered coax remote to the wall port at the other end of the cable under test.
4.Press ON/OFF Button to turn on the tester and then press Video
video cable test function.
5.Interpret the results of the test by looking at the wiring and display example.
Tester
F-Connector
Coax Cable
F-Connector
Cable
VDV Wire Tester
F-Connector
Remote Identifier
Button to select the
F-Connector
Remote Identifier
21