Control Panel; Charging The Built-In Battery - BoomToneDJ BOOMASTER600 Manual De Uso

CONTROL PANEL

1. Previous button to go back to the previous song (USB) or radio station.
2. MODE to switch between the different inputs (Line, Bluetooth, USB, Radio). In BT mode, a long press of 3 sec.
Disconnects the Bluetooth connection with the connected device.
3. REPEAT
4. MIC PRIO> Lowers the overall volume when speaking into microphones. (ON-OFF on screen)
A long press for 3 seconds turns off the animation leds around the speakers.
Another 3 second long press turns on the animation leds around the speakers.
5. Next button to skip to the next song (USB) or radio station.
6. Play / Pause button. In radio mode a long press starts a scan of FM radio stations
7. Line input (Aux) in 3.5mm jack. To connect a tablet, or any other device equipped with a 3.5mm jack audio output
8. Microphone input on 3.5mm jack to connect a microphone with mini-jack plug. Adjust the volume with button (14)
9. TF card input (max 32Gb)
10. Microphone input 1 on 6.35mm jack
11. Microphone 2 input on 6.35mm jack
12. TREBLE> to adjust the high frequencies (10,000Hz)
13. BASS> to adjust the bass (100Hz)
14. MIC VOL> to adjust the microphone volume (MIC1 and MIC2)
15. ECHO> to add echo effect on the microphones
16. USB input (max 32Gb)
17. On / off switch O / I
18. 9Volts power input. To connect the supplied power adapter 9VDC - 1.5A (No other adapter can be connected
under penalty of loss of manufacturer's warranty)
19. MASTER VOL General volume control

CHARGING THE BUILT-IN BATTERY

Before first use, charge the device. To do this, connect the supplied 9V-1.5A adapter to a 220-240VAC mains socket on
one side and to the DC9V input on the speaker (18)
A red light will then light up on the screen. When the battery is 100% charged this indicator turns green.
You can unplug the adapter and use your speaker.
10