Siemens SITRANS LVS200 Manual Del Usuario página 7

• mA output (build-up detection)
Mechanical
Process Connection
• thread
• flanges
• optional sliding bushing
• thread material
Tines
• tine material
1
(PTFE coated tines are available upon special request. Contact your local Siemens
Milltronics representative for ordering information.)
Enclosure
• construction
• conduit entry
• ingress protection
Weight
• standard version, no extensions
• solids/liquids, no extensions
Environmental
• location
• altitude
• ambient temperature
• relative humidity
• installation category
• pollution degree
Process
Temperature
• All approvals except CSA Class II, Group G:
• CSA Class II, Group G:
• For applications with process temperature greater than 80 °C (176 °F), the
maximum threaded bushing surface temperature must not exceed 80 °C (176 °F)
1.
Polytetrafluoroethylene
7ML19985FT62 SITRANS LVS200 – INSTRUCTION MANUAL
All manuals and user guides at all-guides.com
8/16 mA or 4 to 20 mA;
resolution 4 to 20 mA, ±0.1 mA
1½" NPT, 1½" BSPT
DN 100 PN6, DN 100 PN16,
2", 3", 4" ASME 150 lb flanges
with 2" NPT or BSP thread
stainless steel 303 (1.4301) or
optional stainless steel 316 Ti (1.4571)
stainless steel 316Ti (1.4571)
epoxy-coated aluminum
2 x M20x1.5, or 2 x ½" NPT
Type 4X/NEMA 4X/IP66
2.0 kg (4.4 lb)
1.9 kg (4.2 lb)
indoor/outdoor
max. 2000 m (6562 ft)
–40 to 60 °C (–40 to 140 °F)
0 to 100% (suitable for outdoor: ingress
protection: Type 4X/NEMA 4X/IP66)
III
2
–40 to 150 °C (–40 to 302 °F)
–40 to 140 °C (–40 to 284 °F), CSA
temperature code T3B
Page EN-5