Fracarro SIG7120 Instrucciones De Uso página 26

The TS (INPUT) menu allows one to program the channel list that the modulator receives and distributes from
the transport stream. The TS (INPUT) menu is shown in detail:
TS (INPUT)
Update the list of the input
channel
Visualization and management of
the list of the input channel
Confirm the settings by pressing the
5.1.6 TS (INPUT) MENU
TS LOOP-THROUGH
UPDATE LIST IN
CHANNEL LIST IN
< (*) Channel 1 >
< ( ) Channel 2 >
< ( ) Channel N >
CHANNEL LIST OUT
menu continues at
following page
the S key after the modules programmation.
ENABLE DISABLE
Enter with
Refer to the same
programming menu of
Channel 1
key; save the settings by pressing
26
Enable or disable the TS
transmission through the
back-panel
ADD
Possibility to add or remove
the desired channel from
the output list
REMOVE
Program information
CHANNEL
PROGRAM
PROP.
NAME
PROGRAM
TYPE
SERVICE ID
BITRATE Information about the total
USED used bitrate (read-only)
Information about the total
BITRATE
bitrate available (read-only)
AVAIL.