Fracarro SIG7120 Instrucciones De Uso página 29

• ADD PID: adds a program's PID (it is possible to add maximum 10 PIDs)
• ADDED PID LIST: displays the list of the PIDs added during programming
• REMOVE PID: removes only the selected PID
• REMOVE PID: removes/disables a PID by setting it from the TPE keyboard
• CUT PID LIST: to display the list of the removed/disabled PIDs
• RESTORE PID: manually restores the previously selected removed/disabled PID
• CLEAR ADDED PIDs: sets all the previously added PIDs to zero with a single operation.
• RESTORE CUT PIDs: restores all the previously removed/disabled PIDs with a single operation.
TS IN SELECTION – Parallel (back-panel) or Serial (ASI) Transport Stream selection source;
ALL PIDs OUT – send to the output all the PIDs (programs) contained on the Transport Stream Input (up to 32
PIDs maximum);
ADVANCED MANAGEMENT
Advanced management configuration of the individual parameters involved in the transponder or program was
provided to overcome any deficiencies related to obsolescence or incomplete management of certain param-
eters by the set top box connected to the outlet
• SET ORIG. Net ID: You can manually change the Network ID used originally set by the broadcaster;
• Set TS ID: You can manually change the ID associated to the Transport Stream originally set by the broad-
caster;
• HEADEND Decrypt: you can change the status (ON / OFF) of the flag on the program decoded into central
prevents the OSD message "encoded image" is being revived in the TV overlay or Set Top Box connected
to the outlet.
NOTE: the addition or the removal of the PIDs does not imply the regeneration of the program tables.
MEASURES
Information about bitrate of
transmitted channel
Information about temperature
Confirm the settings by pressing the
SOFTWARE VERS.
BITRATE
OVERFLOW ALARM
TEMPERATURE TEMP. MOD. CORE
OVERTEMP ALARM
the S key after the modules programmation.
SIG7120 SIG7121 v. 0
Measurement of used bitrate
BITRATE USED
Measurement of avalilable bitrate
BITRATE AVAIL.
Measurement of the
BR. USED PEAK
peak of used bitrate
Measurement of the
BR. AVAIL. PEAK
peak of available bitrate
Reset of the bitrate peaks
RESET BR. PEAKS
RESET ALARM
key; save the settings by pressing
29
Read only
RESET ALARM
NORMAL Read only