CONTENTS
1. Safety Instructions ....................................................................................................................................
2. Installation ..................................................................................................................................................
3. Pump Operation .........................................................................................................................................
4. Maintenance ...............................................................................................................................................
5. Troubleshooting ................. .......................................................................................................................
When installing and using this electrical equipment, basic safety
precaution should always be followed, including the following:
IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW
• The spa must be supplied through an isolating transformer or
supplied through a residual current device (RCD) having a rated
residual operating current not exceeding 30mA.
• The pump must be tested before each use, to test follow the
instruction of pump.
• If the supply cord is damaged, it must be replaced by the
manufacturer, service agent or similarly qualified persons in order to
avoid a hazard.
• To reduce the risk of electric shock, do not use extension cord to
connect unit to electric supply; provide a properly located outlet.
• No part of the appliance is to be located above the bath during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible to a
person in spa pool; Parts incorporating electrical components,
except remote control devices, must be located or fixed so that they
cannot fall into the spa pool.
• The spa must be supplied by earthed power source.
• Warning: Always keep plug dry, plug in with wet plug is
definitely forbidden!
• The plug shall be directly connected only to a socket-outlet of the
fixed electrical installation.
• It is necessary to have the plug accessible after installation of the
spa.
CAUTION: In order to avoid a hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
After using your spa for 3-5 years, you should contact your local
qualified maintenance technician to ensure the safety and
303021204523/14x21cm/ 54189/欧规AirJet SPA说明书/英
SAFETY INSTRUCTIONS
ALL INSTRUCTIONS.
WARNING:
4
P4
P8
P10
P11
P13