Strend Pro CRS-S20Li Manual página 26

blade can tilt and lead to loss of control over the power tool.
• After you have inished work, turn the power tool off and do
not pull the saw blade out of the cut until it has come to a
standstill. In this way you will avoid any kickback and can safely
put down the power tool.
Use only undamaged saw blades in perfect condition. Bent
●
or blunt blades can break, adversely affect the cut or cause
kickback.
Do not brake the saw blade after switching the device off by
●
applying side pressure. The saw blade may be damaged, break
or cause a kickback.
• Tighten the material irmly. Do not support the work piece by
hand or foot. Do not touch any objects or the ground with the
saw running. There is a risk of kickback.
Use suitable detectors in order to ind hidden supply lines or
●
ask the local utility company. Contact with electrical cables can
lead to electric shock and ire, contact with a gas pipe can result in
an explosion. Damage to a water pipe can lead to property
damaged and electric shock.
Hold the power tool tightly with both hands while working
●
and ensure a secure footing. The power tool is guided more
securely with both hands.
Secure the work piece. A work piece that is retained with
●
clamping devices or a vice is held more securely than with your
hand.
Wait until the power tool has stopped before placing it
●
down. The tool insert can tilt and lead to loss of control over the
power tool.
Do not saw any materials (e.g. lead-based paints and
●
coatings or materials containing asbestos) whose dust can
be harmful.
SPECIAL SAFETY DIRECTIONS FOR BATTERY-OPERATED
TOOLS
• Ensure that the device is switched off before inserting the
OPERATION
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come
off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
The machine requires no additional lubrication. If a fault occur, e.g. after wear of a part, please contact your local dealer's service.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted machines to your
local dealer. Here they will be disposed of in an environmentally safe way.
Li-ion batteries can be recycled. Deliver them to a disposal site for chemical waste so that they can be recycled or
disposed of in an environmentally friendly manner.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents:
EN60745-1:2009+A11:2010;
2001+A2/:2008; in accordance with the regulations 2006/42/ЕEС, 2014/30/ЕEС.
NOISE/VIBRATION Measured in accordance with EN60745 the sound pressure level of this tool is <81dB(A) and the sound
power level is <92dB(A) (standard deviation: 3 dB), and the vibration is <7,5 m/s
DECLARATION OF CONFORMITY
EN55014-1:2006/+A1 ： 2009/+A2:2011;
EN60745-2-11:2010;
battery. Inserting a battery into a power tool that is
switched on may result in accidents.
• Recharge the batteries indoors only because the
battery charger is designed for indoor use only. Risk of
electric shock.
• To reduce the electric shock hazard, unplug the
battery charger from the mains before cleaning the
charger.
• Do not subject the battery to strong sunlight over
long periods and do not leave it on a heater. Heat
damages the battery and there is a risk of explosion.
• Allow a hot battery to cool before charging.
• Do not open up the battery and avoid mechanical
damage to the battery. Risk of short circuit and fumes
may be emitted that irritate the respiratory tract.
Ensure fresh air and seek medical assistance in the event
of discomfort.
• Do not use non-rechargeable batteries. This could
damage the appliance.
RESIDUAL RISKS
Even if properly operating and handling this electric tool,
some residual risks will remain. Due to its construction and
build, this electric tool may present the following hazards:
a) Lung damage, if suitable respiratory protection is not
worn;
b) Cuts
c) Ear damage if working without ear protection.
d) Damage to your health caused by swinging your hands
and arms when operating the appliance for longer periods
of time or if the unit is not held or maintained properly.
2
.
EN55014-2:1997/+A1 ：