The exclama on point within an equilateral triangle is intended to alert user to the
presence of important opera ng and maintenance (servicing) inst
literature accompanying the appliance.
(See markings on the back of the unit.)
Safety caution:
The normal function of the product may be disturbed by strong Electro-Magnetic Interference.
If so, simply reset the product to resume normal operation by following the instruction manual.
In case the function could not resume, please use the product in other location.
Before Use
1. Choose unit installa on loca on carefully. Avoid placing it in direct sunlight or close to a source
of heat. Also avoid loca
from sources that hum, such as transformers or motors.
2. Do not open the cabinet as this might result in damage to the circuitry or electrical shock, if a
foreign object should get into the set, contact your dealer.
3. Be sure not to handle record with dirty fingers. Never play a record that has a crack on the
surface.
4. When removing the power plug from the wall outlet, always pull directly on the plug, never
pull the cord.
5. To protect the stylus, don't forget to put on the white prot
6. Do not a empt to clean the unit with chemical solvents as this might damage the finish.
Use a clean, dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord from the wall
outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of me,
such as a vaca
8. Keep this manual in a safe place for future reference.
How to Replace the Turntable Stylus (Needle)
Removing old stylus
1. Set a screwdriver at the p of the stylus and push
down in the dir
"A".
2. Remove the stylus by pulling it forward and down.
Installing a new stylus
1. Hold the p of the stylus and insert the other edge
by pressing in the dir
2. Push up in the dir
subject to vibra ons and excessive dust, cold or moisture. Keep away
"B".
"C" un l it locks at the
4
ve needle cover
.
in the
er use.