4. Remove the white plas
future use.
5. Select the speed according to the record you are playing.
6.
and move tone arm to turntable, TONE ARM CONTROL INDICATOR will light up. Place tone
arm on the edge of the record and the record starts playing.
NOTE:
You're strongly recommended to play records with transparent dust cover closed. Also, please
don't place anything on top of dust cover especially playing a record.
7. To pause or stop playing, you need to
manually.
8. When the record reaches to its end, tone arm and rota
INDICATOR lights off.
9. Remember to cover the white plas
Lightning Control
1. Power on the unit.
Note:
the brightness.
conversion speed.
BEFORE USING
control unit, point it towards the front panel of the unit.
control.
•
If the remote control unit is operated near other appliances which generate infrared rays,
or if other remote control devices using infrared rays are used near the unit, it may operate
incorrectly. Conversely, the other appliances may operate incorrectly.
needle cover. Keep the needle cover in a safe and accessible place for
and move the tone arm back to the tone arm rest
the tone arm and place it to tone arm rest manually.
needle guard to protect the stylus and unplug the unit.
stop and TONE ARM CONTROL
3.
BRIGHTNESS level down / SPEED down
6