ico ICO001 Manual Del Usuario página 4

Removable Piston
Head Gasket
Charger Gasket
Decorator Adapter
Decorator Tips (Set of Three)
Charger Holder
To order spare parts, please visit us online at www.icotrading.com
Instructions for use
Before using your dispenser for the first time, disassemble the device and fully
clean the unit as per the cleaning instructions in this manual.
Prior to Filling
1. Check whether the head gasket (RP001) is inserted in the device's headset
(RP009/RP010) and that the piston (RP005/RP006) is clear of all obstructions
2. Lightly screw the preferred decorator tip onto the dispensing valve until it no
longer turns
Filling
3. Fill the dispenser with your cream, soup, or other preparation. Use a seive if
your preparation contains solid ingredients (like fruit seeds or cloves)
Note: The maximum filling amount is 500ml (ICO001, ICO002, ICO004) or 1L
(ICO003, ICO005). Pay attention to the external filling line and labeling on the base
of the bottle. Do not overfill! The remaining empty space is required for optimum
aeration. For best results, use a measuring cup when filling your dispenser.
Warning: Fully dissolve sugar or powdered ingredients in the mixture before filling
to avoid the formation of clumps. Any solid ingredients such as fruits, vegetables,
and course spices must be pureed and passed through a fine sieve before being
poured into the bottle.
Aluminum: RP005
Stainless Steel: RP006
RP001
RP011
RP008
ABS Plastic: RP003
Stainless Steel: RP012
ABS Plastic: RP004
Aluminum: RP002
Stainless Steel: ICORP013
English
4