General Power Tool Safety Warnings - Makita DFL201R Manual De Instrucciones

ENGLISH
(Original instructions)
1 Red part
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Switch trigger
7 Reversing switch lever
8 Lamp
SPECIFICATIONS
Model
Hard joint
Fastening
torque
Soft joint
Square drive
No load speed (min
Overall length
(Depending on the battery)
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combi-
nation, according to EPTA-Procedure 01/2014, are shown in the table.
Transmitter
Frequency band
Maximum radio-frequency power
• Intended use: Transmitting various data regarding the fastening operation from the tool and saving them in a PC via
the receiver.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
4
Explanation of general view
9 LED#A
10 LED#B1
11 LED#B2
12 Screw
13 Angle head
14 Hole for adjust grip
15 Ring
16 Scale
DFL201R
10 – 20 N•m
10 – 20 N•m
9.5 mm
–1
) 360
412 – 429 mm
1.5 – 1.7 kg
BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 / BL1460A / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
DFL301R
16 – 30 N•m
16 – 30 N•m
9.5 mm
460 – 477 mm
1.8 – 2.0 kg
D.C. 14.4 V
2,402 – 2,480 MHz
6.49 dBm (EIRP)
Save all warnings and instructions for future
ENE033-1
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
GEA010-2
17 Adjust grip
18 Yellow line
19 Compression spring
20 Socket
21 Hole
22 Pin
260
460 – 477 mm
DFL402R
25 – 40 N•m
25 – 40 N•m
9.5 mm
200
1.8 – 2.0 kg