Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
English
• "A steady Red light after inserting the battery" indicates the battery is
too warm to be charged. Once the battery has cooled, the Red light will
go off and the flashing Green light will illuminate indicating the charge
cycle has begun.
• "RED Light Flashing after inserting the battery" This indicates the
battery pack is deffective and needs to be replaced. Please dispose of
the deffective battery in the perscibed method explained in this manual.
• After charging, unplug the charger from the power source.
• Other tips for extending Battery life: Do not store batteries completely
discharged.
Charge them fully before storing.
WARNiNG:
Always be sure that the tool is switched off before insertion or
removal of the battery cartridge.
Installing or removing battery cartridge
• To remove the battery cartridge, withdraw it from the tool while
depressing the tabs on both sides of the cartridge.
• To insert the battery cartridge, align the ribs on the top of the battery
with the grooves in the housing and slide it into place. Always insert
it all the way until it locks in place with a little click. Lightly pull on
the battery cartridge to ensure it is locked into place and will not
accidentally fall out of the drill, causing an injury.
• Do not use force when inserting the battery cartridge. If the battery
does not slide in easily, it is not being inserted correctly.
Important Battery Information: Disposing the Battery Pack
• Your batteries are Lithium-Ion rechargeable batteries. Certain Local,
State and Federal laws prohibit disposal of these batteries in ordinary
trash.
• Consult your local waste authorities for your disposal/recycling
options.
• More information regarding battery disposal in U.S. and Canada is
available at; http://www.rbrc.org/index.html, or by calling 1-800-822-
8837 (1-800-8BATTERY).
Publicidad
