Bresser ClimateTemp NDV Manual De Instrucciones página 27

NOTE: When the indoor temperature is lower than
-5 °C (23.0 °F), the screen displays LL.L. When the
temperature is higher than 50 °C (122.0 °F), the screen
displays HH.H.
TEMPERATURE AND HUMIDITY ALARM SETTING
1. Press and Hold [
Humidity alarm.
2. The setting parameter will flash.
3. Press [ ] or [ ] button to set the desired data.
4. Press [ MODE ] button to confirm setting and enter
to next parameter.
5. Sequence of setting: Indoor upper temperature
limit  Indoor lower temperature limit  Indoor
upper humidity limit  Indoor lower humidity limit
 outdoor upper temperature limit  outdoor
lower temperature limit  outdoor upper humidity
limit  outdoor lower humidity limit
TEMPERATURE AND HUMIDITY ALARM OPERATION
1. Press [ ] to on/off temperature and Humidity
alarm.
2. When the measured temperature or humidity is
greater than the set upper limit or lower than the
set lower limit, the station will give an alarm.
] enter to set temperature and
ICE ALERT
If the channel 1 sensor falls between -2°C to 3°C
(28°F to 37°F), the ice alert indicator [
and will disappear once the temperature is out of this
range.
BACKLIGHT
1. Press [ ] to activate backlight for 10 seconds.
2. When connected to the adapter, the backlight can be
set to 4 levels of brightness.
DE
] will display, EN
IT
FR
ES
NL
27