Toshiba TCB-AX21U-E Manual Del Propietário página 8

Display Section
All indicators are shown in the right and the lower figures for the
explanation.
Only selected contents are display in actual operation.
• When turning on the leakage breaker at the first time 3
minutes later, [SET DATA] flashes about for 1 minute on the
display part of the remote controller. While this display is
flashing, the model is being automatically confirmed.
Accordingly, wait for 1 minute after [SET DATA] display has
disappeared, and then use the remote controller.
2
3
ADR
4
1
Transmitting indication
Displayed while operating the switches of
the remote controller.
2
Mode display
The selected operation mode is displayed.
3
Fan mode select display
The selected fan mode is displayed.
(AUTO)
(HIGH)
(MED.)
(LOW)
4
Filter display
If "FILTER " is displayed, clean the air
filter.
5
CHECK display
Displayed while the protective device
works or a trouble occurs.
All manuals and user guides at all-guides.com
1
10
6
7
8
9
10
5
ADR
SET
CL
ACL
5
6
7
8
9
Set up temperature display
The selected set up temp. is displayed.
Flap position display
SWING display
Displayed during up/down movement of
the flap.
Timer time display
Time of the timer is displayed.
(When a trouble occurs, the check code is
displayed.)
Timer SETIN setup display
When pushing the Timer SET button,
the display of the timer is selected in
→
order of [OFF]
[OFF] repeat OFF timer
→ No display.
Display
section
Operation
section
ADR
SENSOR
→ [ON]