Pc In Socket (D-Sub Jack) - Hyundai HLT-1711 Manual Del Usuario

1 1

PC in socket (D-Sub jack)

1. Connect the signal cable from the monitor output sock-
et of the PERSONAL COMPUTER to the PC input
socket of the set.
2. Connect the audio cable from the PC to the PC SOUND
sockets of the set.
3. Press the INPUT SELECT button to select
4. Switch on the PC, and the PC screen appears on the
set.
The set can be operated as the PC monitor.
Note : If you have an Apple macintosh, connect the VGA
desktop block (not supplied) from the 3 row 15 pin to 2 row
15 pin with the signal cable and connect the VGA desktop
block to the Macintosh.
Displayable Monitor Specification
Proposed Resolution H-freq(KHZ)
DOS
720x400 37.9KHz
VESA(VGA) 640x480 31.5KHz
VESA(VGA) 640x480 35KHz
VESA(VGA) 37.9KHz
640x480
VESA(VGA) 640x480 37.5KHz
VESA(SVGA)
800x600 35.1KHz
VESA(SVGA) 800x600 37.9KHz
VESA(SVGA) 800x600 43.75KHz
VESA(SVGA) 48.1KHz
800x600
VESA(SVGA) 800x600 46.9KHz
VESA(XGA)
1024x768 48.4KHz
VESA(XGA) 1024x768 56.5KHz
VESA(XGA) 1024x768 57.672KHz
VESA(XGA) 60.0KHz
1024x768
VESA(SXGA) 1152x864 67.5KHz
VESA(WXGA) 1280x768 47.7KHz
(Synchronization input form : separate)
All manuals and user guides at all-guides.com
Note :
a. If the set is cold, there may be a small ÒflickerÓ when the
set is switched on. This is normal, there is nothing
wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video
PC. mode to obtain the best image quality for your LCD mon-
itor. If used under the other resolutions, some scaled or
processed pictures may appear on the screen. If used to
PC vertical frequency 85Hz, some noise can be seen
when PIP is on. In this case, set the PC vertical frequen-
cy to 60Hz. The set has been pre-adjusted to the mode
VESA 1,024x768@60Hz.
c. Some dot defects may appear on the screen, like Red,
Green or Blue spots. However, this will have no impact
or effect on the monitor performance.
d. Do not press the LCD screen with your finger for a long
time as this may produce some temporary distortion
V-freq(HZ) Pixel clock(MHZ)
effects on the screen.
70Hz 35.50MHz
e. When the PC screen appears on the set, a message may
60Hz 25.17MHz
70Hz 28.560MHz appear on the screen, and the message will differ accord-
72Hz 31.50MHz
ing to the Window system version (Win98, 2000). If a
75Hz 31.50MHz
message appears click ÒNextÓ until the message finishes.
56Hz 36.00MHz
f. If the message Ò
60Hz 40.00MHz
adjust the PC as in the ÔDisplayable Monitor
70Hz 45.5MHz
72Hz 50.00MHz
SpecificationÕ section.
75Hz 49.50MHz
60Hz 65.00MHz
70Hz 75.00MHz
72Hz 78.434MHz
75Hz 78.75MHz
75Hz 108.00MHz
60Hz 80.136MHz
out of Range Ó appears on the screen,
EN
29