Hyundai HLT-1711 Manual Del Usuario página 8

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.
1
1
Aerial socket
1.Connect the RF out socket of the VCR to the aerial
socket of the set.
2.Connect the aerial cable to the RF aerial in socket of
the VCR.
3.Store the VCR channel on a desired programme num-
ber using the 'Manual programme tuning' section.
4.Select the programme number where the VCR channel
is stored.
5.Press the PLAY button on the VCR.
8
All manuals and user guides at all-guides.com
< Back panel of the set >
VCR
2
2
Watching VCR
- If you connect an S-VIDEO
VCR to the S-VIDEO input,
the picture quality is
improved ; compared to con-
necting a regular VCR to the
Video input.
If a 4:3 picture format is
used;the fixed imgae may
remain visible on the screen.
- To avoid picture noise (inter-
ference), leave an adequate
distance between the VCR
and set.
1.Use the INPUT SELECT button on the remote control
to select AV1 or AV2 .
(If connected to S-VIDEO, select the
source.)
2. Insert a video tape into the VCR and press the PLAY
button on the VCR.
(See VCR owner's manual)
< Back panel of the set >
A A V2 V2 S-VIDEO S-VIDEO ANT ANT IN IN
( )
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
< Back panel of the VCR>
SAV external input