Safety Instructions - GCE UNICONTROL 500 OXYGEN REGULATOR Manual De Usuario

OPERATING INSTRUCTIONS FOR UNICONTROL CYLINDER PRES-
SURE REGULATORS CORRESPONDING TO EN ISO 2503
EN
These instructions are produced in accordance with current regulations
to ensure the safe operation of Cylinder Pressure Regulators. Specific at-
tention to these instructions will help to avoid risks and loss of production
as well as enhance the reliability and durability of these Cylinder Pressure
Regulators.
THESE INSTRUCTIONS MUST BE KEPT PERMANENTLY AT HAND IN
THE WORKSHOP
For safety instructions, also see paragraph 2; if in any doubt please
consult the manufacturer.
1. OPERATION
1.1. Cylinder Pressure Regulator use in accordance with current regu-
lations.
Cylinder Pressure Regulators are designed to reduce the respective cylin-
der pressure and to ensure a constant outlet working pressure. They are
used with compressed gases pressurised dissolved gases in cylinders and
liquid gases having a max. filling pressure as stated on the regulator.
1.2. Cylinder Pressure Regulator use, contrary to current regulations:
• Cylinder Pressure Regulators must not be used for gases in a liquid state.
• Cylinder Pressure Regulators must not be operated under temperatures of
- 30°C or above + 60°C.
• Cylinder Pressure Regulators must not be used for corrosive gases such as
ethylamin, dimethylamin, ammonia etc.

SAFETY INSTRUCTIONS

2.
All indications showing this exclamation mark are important safety instruc-
tions.
2.1. Cylinder Pressure Regulator comply with all current relevant technical
regulations and meet all existing standards.
2.2. Under no circumstances must the Cylinder Pressure Regulator be
modified or tampered with without the written consent of the manufacturer.
2.3. Intermediary connections between the Cylinder valve and the Cylinder
Pressure Regulator are strictly prohibited.
2.4. Incorrect use may endanger the operator and other personnel, damage
to the Cylinder Pressure Regulator and Installation may also result in fire
and / or explosion.
2.5. Regulations to be adhered to:
ln Germany: UVV (= instructions to avoid accidents: Welding, Cutting and
Associated procedure's VGB 15), EN ISO 2503 Cylinder Pressure Regula-
tor.
4/52