System Settings - ATH-Heinl ATH-W Manual De Instrucciones

2.7.8.
The basic settings can be established using the system settings.
Display unit for the imbalance grams / ounces
Automatic start when closing the wheel protector on/off
Calibration programme for the automatic gauge (2D)
Calibration programme for the automatic gauge (optional 3D)
Calibration programme
HID programme
Adjustment of weight attachment:
In this option can be chosen, whether the counterweights will be add by help of the gauge or the 6 o'clock
laser.
In order to access the system, you must press the key combination
shown opposite:
1. First the C button and then the T button
2. The CAL – CAL displays will appear and the indicator lights flash.
3. Release the buttons only when the indicator light is steady.
4. Press the A↓ button
5. Press the A↑ button
6. Press the ALU button
7. Press the A↑ button four times
Turn on/off the 6 o´clock laser by using B↓; B↑
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-10

System settings

4x
- 31 -
+
+
+
+
+
+
+
> >