Before Operation - KRESS KUA23 Manual Del Usuario

and noise accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
TECHNICAL DATA
Battery pack(KPB1202)
Charger(KCH1202)
Holster (KA1601)
Stacking Box (KA4200)
We recommend that you purchase your accessories listed in
the above list from the same store that sold you the tool. Refer
to the accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATION GUIDELINES
Note: Please read the instructions carefully before use.
Usage
This tool is used to turn screws or drill holes in wood, metal
and plastics.
INSTALLATION AND OPERATION
STEPS

BEFORE OPERATION

KUA23 KUA23.2 KUA23.9
2 2
1 1
1 1
/ 1
Pictures
Disassemble battery pack
Battery pack charging
Installation of battery pack
INSTALLATION
CHUCK ADJUSTMENT
Warning: When replacing acces-
/
sories, make sure that the power
supply is cut off and the switch is turned
/
off (the reversing lever is in the middle
1
position). When starting the tool, make
sure that there is no hidden danger to
1
the drill bit. Damage or loosening of the
chuck may cause personal injury.
Drill bit disassembly
Installation of drill bit
OPERATION
Forward and reverse switching
Warning: The direction of rota-
tion can not be changed until the
machine is completely stationary.
SPEED SHIFT
TORSION ADJUSTMENT
Drill, screwdriver
Start/stop
Warning: Do not use start-stop
switch for long time and low speed
operation, otherwise the machine may
overheat and cause tool damage.
See Figure A1
See Figure A2
See Figure A3
See Figure B1
13
See Figure B2
See Figures
C1, C2, C3
See Figure D
See Figure E
See Figure F