Installation
Metal Mounting Sleeve
Dash
Metal Support Strap
Factory Bracket
(ISO DIN Mounting)
Installing
• Mount the Locks for the Installation Sleeve onto the source unit (use
supplied screws).
• Mount the Installation Sleeve into a secure instrument panel.
NOTE: Make sure to mount the Source Unit as close to horizontal as
possible for optimum CD/DVD Player performance. Mounting Angles of
up to ±20° from horizontal can be accommodated.
• Bend Appropriate Tabs on all sides of the installation sleeve.
• Install Source Unit by sliding unit into installation sleeve until it clicks
into place.
• Mount Back Strap securely behind the instrument panel to prevent
source unit vibration.
• Back strap Screw should be 6mm max (use supplied screw).
Removal;
• Disconnect Back Strap from rear of radio (if used).
• Remove Trim Piece from front of radio.
• Insert Release Keys into left and right sides of source unit to disengage
locks.
• Remove Source Unit from installation sleeve with release keys.
Bend tabs against dashboard
with a screwdriver.
Plastic Trim Ring
Unit Chassis
Release Keys
ISO-DIN MOUNT
Installing
• Remove Trim Piece and Installation Sleeve from source unit.
• Factory Bracket should align with two mounting holes on each side of
source unit.
• ISO Screws should be 6mm max (use supplied screws).
• Install Source Unit into instrument panel.
6
iPod/iPhone
External Bluetooth Mic
illus.-2.1
Black
Black
External Bluetooth
Mic Input
Yellow
Green
Gray
Video Output 1
Yellow
Green
Gray
Video Output 2
Black
Green
Black
Rear Camera Intput
Black
Blue
Black
Subwoofer Output
Subwoofer preamp output is active
Black
in all audio modes.
Black
Black
** The Steering Wheel Control allows
USB Output
USB Intput
for the use of the PAC SWI-RC
interface module. (sold separately)
Yellow
White
Red
White
Front Left
White/Black
Parking Brake
Gray
Front Right
Switch
Gray/Black
Violet
Rear Right
Ground
Violet/Black
Green
Rear Left
Green/Black
Blue/White
Remote Turn On
Yellow/Blue
Parking Brake
Yellow (Battery +)
Black (Ground)
Ground
Red (Accessory)
White/Brown (Reverse)
Reverse Light
Ground
7
Installation - Wiring
White
Line Out Rear Left
Red
Line Out Rear Right
White
Line Out Front Left
Red
Line Out Front Right
Blue
Steering Wheel Control Input
illus.-3.1