Garmin GSC 10 Instrucciones página 2

190-00646-00_0H.indd 2
Installing the GSC 10
WARNING

See the Important Safety and
Product Information guide in
the Forerunner or the Edge
®
product box for product
warnings and other important
information.
Both magnets must be
aligned with their respective
indication lines.
1. Place the GSC 10 on the
rear chain stay (on the
side opposite the drive
train).
NOTE: Place the flat
rubber pad or the
➊
triangle-shaped rubber
pad between the GSC 10
and the chain stay for
stability.
➓
➏
➊
➋
2. Loosely attach the
GSC 10 using two cable
ties ➋.
3. Attach the pedal magnet
to the crank arm using
➌
the adhesive mount and a
cable tie ➍.
The pedal magnet must
®
be within 5 mm of the
GSC 10. The indication
line on the pedal
➎
magnet must line up with
the indication line
the GSC 10.
➍
➌
4. Unscrew the spoke
magnet
➐
plastic piece.
➒
5. Place the spoke in the
groove of the plastic
piece, and tighten it
slightly.
EN–2
on
➏
➎
from the
➐
➑
7/2/2012 7:51:31 AM