Technical Specifications - Garmin GSC 10 Instrucciones

190-00646-00_0H.indd 4
CAUTION

Contact your local waste
disposal department
to properly recycle the
batteries.
Replacing the GSC 10
Battery
1. Locate the circular
battery cover on the
➊
side of the GSC 10.
➊
➋
2. Use a coin to twist the
cover counter-clockwise
until it is loose enough to
remove (arrow points to
unlocked).
3. Remove the cover and
the battery ➋.
4. Wait 30 seconds.
5. Insert the new battery
with the positive side
facing up.
NOTE: Be careful not to
damage or lose the O-ring
gasket on the cover.
6. Use a coin to twist the
cover clockwise back into
place (arrow points to
locked).
After you replace the GSC
10 battery, you must pair it
with the device again.
Technical
Specifications
Physical size: W × H × D:
2.0 × 1.2 × 0.9 in.
(5.1 × 3.0 × 2.3 cm)
Weight: 0.9 oz. (25 g)
Water resistance: IPX7
Transmission range:
approximately 9.8 ft.
(3 m)
Battery: user-replaceable
CR2032 (3 volts)
Perchlorate Material –
special handling may
apply. See
www.dtsc.ca.gov
/hazardouswaste
/perchlorate.
Battery life: approximately
1.4 years (1 hour per
day)
Operating temperature
range: from 5°F to
158°F
(from -15°C to 70°C)
EN–4
7/2/2012 7:51:31 AM