How It Works - Daspi YACO 800 KG Manual Del Usuario

Sliding door control board with110 to 220 V AC power supply for one motor at 110 to
220 V (with or without encoder), with RX Multi radio receiver integrated, force
regulation and soft stop operation for opening and closing maneuver.
• Maneuvers are executed through the START button (1—2) or by radio
(remote).
• Maneuvers end by activation of limit switches or by the finish of
operation time.
• If an order is given during opening operation, the maneuver stops and
automatic closure is deactivated.
• Stop activation button (6-7) causes the immediate stop of the
maneuver, being necessary a new order restart the maneuver.
• The activation of photocell input (5-6) during closing inverts the
maneuver causing opening.
• Garage light is activated for 3 minutes after starting the maneuver.
• Strength motor regulation is applied 2 seconds after the maneuver starts.
Soft Stop adjusts the pace of the motor during the stopping period when
I7 DIP is ON.
CONNECTORS
YACO 800 / 1500 KG

HOW IT WORKS

CONNECTIONS
SAFETY STOP SAFETY CONTACTS ACCESSORY
POWER SULLY