Uline H-4120 Manual Del Usuario página 2

Figure 2
Figure 3
1, 2
PAGE 2 OF 6
ASSEMBLY CONTINUED
2. Align armrest with holes on back and seat cushion
3. Slowly lower chair assembly onto the gas lift.
CHAIR ADJUSTMENTS
1. Seat Height Adjustment – To raise seat height, lift
2. Upright Tilt Lock – To lock the chair in an upright
3. Tilt Tension – To increase tilt tension, turn knob
3
1-800-295-5510
uline.com
Use two 5/16 x 1⁄" screws to attach. Repeat on
opposite side. (See Figure 2)
NOTE: Use Allen wrench to tighten all screws.
Press down on seat cushion to secure in place.
(See Figure 3)
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
position, push the lever in toward the center of the
seat. To restore tilt, pull lever out. Chair has standard
tilt; the seat and back tilt simultaneously at the same
ratio.
clockwise. To decrease tilt tension, turn knob
counterclockwise.
0721 IH-4120