Safety Considerations - EGAmaster 65512 Manual De Instrucciones

SAFETY CONSIDERATIONS

•
While the instrument is operating, be careful not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser beam for a long time may be hazardous to
yours eyes. (Laser beam: equivalent to class 2 laser level)
•
Do not try to dismantle the instrument. Have it repaired by your dealer or authorized repair
shop. Dismantling it by yourself may worsen the trouble.
•
Do not stand on the carrying case. The case could turn over causing the person standing on
it to fall.
•
When attaching the instrument to a tripod, make sure the instrument is securely fixed to the
tripod and then securely tighten the tripod leg clamps. If not securely fastened and/or
tightened, the main unit could fall off or the tripod could fall over.
•
When carrying the tripod, be careful so that the tripod shoes do not strike anyone.
•
When setting the tripod, make sure not to stab someone's hand or foot with the tripod
shoes.
•
Operate this laser product with the height of laser avoiding that of eyes of car drivers and
pedestrians. Avoid putting the laser on a highly reflective material such as mirror. When
disposing of this instrument, take a measure such as breaking the battery cap so that the
laser will not be emitted.
PRECAUTIONS
•
The instrument should not be stored or used in extreme temperature or job on a place
subject to rapid change of temperature. The instrument may not function properly if used
out of the ambient temperature range.
•
Put into the carrying for storage and place in a dry area not subject to vibration, dust or high
moisture.
•
When storage usage temperatures are widely different, leave the instrument in the case
until it can adjust to the surrounding temperature.
•
The detector may react to the laser beam and further react to the flurescent lamp, site lamp,
modulated light or and electric wave (in or near the airport etc.)and so correct measurement
is sometimes not performed near these places. In these cases, please measure again after
stopping or cutting these modulated light or wave etc.
•
The instrument should be transported or carried carefully to avoid impact or vibration.
•
The instrument should be stored in the carrying case and packed with cushioning material
and handle with care as 'Fragile'.
•
After the instrument has been stored a long time or it has suffered an impact or vibration, be
sure to check to see if trouble exists before use. If any trouble exists, adjust or have it
repaired.
All manuals and user guides at all-guides.com