Refilling
Refilling while ironing
WARNING
• The Iron Uses PRESSURIZED STEAM. DO NOT OPEN the Filling Cap Except as
Instructed below. Contact with the Pressurized Steam Can Cause Severe Scalding.
• TURN OFF and Then Unplug When Not in Use or When Filling / Emptying Steam
Generator.
13
1.Turn off the boiler switch (13).
4.
And unplug the device.
All manuals and user guides at all-guides.com
Low water indicator
A buzzer goes off when the water in the boiler drops to the minimum
level.
Please refer to the chapter below for refilling while ironing.
2. Press the steam button and
hold it down until no more steam
is emitted. Direct iron away from
your body or others.
5. Unscrew the filling cap slowly
until you hear or see the steam
escaping -about 2 turns- and
wait until residual steam has
totally escaped. Use a cloth to
avoid direct contact with the
steam.
7
12
3. Turn off the iron switch (12).
6. Now unscrew the filling cap
completely and refill as shown
on page 3.