Ironing; Hints For Use - LauraStar MAGIC EVOLUTION Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ironing

Blowing – vacuum & choice of 2 speeds
A single steam button situated on the iron allows you to both start the emission of steam and switch from
"blowing" mode to "vacuum" mode (or vice versa).
Changing from one mode to the other can be done only when the motor is off. The chosen mode stops
automatically at the end of a cycle (lasts 4 seconds). At that moment you may select the desired mode.
In addition to the vacuum and blowing functions, the steam button 24 enables the strength of the airflow
from the ventilator to be regulated. When the iron is switched on, the ventilator is pre-set to maximum
capacity (100%). Changing from one mode to the other can be done only when the motor is off. To change
to reduced airflow (50%), press the steam button twice very quickly. To go back to maximum airflow, press
the steam button twice again.
Blowing
A very short press (less than half a second) on the steam button starts the "blowing" mode. When blow-
ing mode is chosen, each press of the button to give steam restarts the cycle (lasts 4 seconds).
Vacuum
A long press (more than one second) on the steam button starts the "vacuum" mode. Vacuum is engaged
at every emission of steam and stops 4 seconds after the end of the jet of steam to guarantee optimum
drying of the fabric.
When vacuum is being used each press on the button to give steam restarts the cycle (lasts 4 seconds).

Hints for use

Why have blowing and vacuum?
Perfect ironing requires steam to be injected into the fabric. This is a requirement for the complete removal
of creases. For this, the Laurastar
cleaning: vacuum and blowing.
To improve the quality of ironing and increase the autonomy of your appliance, steam iron the material first
and then re-iron it without steam, in order to dry the material.
Back
Buttons
and collar and creases
blowing
vacuum
Angora/Wool
• Steam iron about 4 in. from the surface of the material to avoid damage.
• Shake the garment by hand so that it regains its normal shape.
All manuals and user guides at all-guides.com
Magic Evolution system uses the same methods as for professional dry
Welt
Legs
Inside
and lining
5
Sleeves
Buttons
Top
Pleats
and collar

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido