Cleaning And Maintenance - Fagor TK-2005 Manual De Instrucciones

All manuals and user guides at all-guides.com
interior 31/5/05 19:12
Switching the kettle back on again
• The kettle can be switched back on
again after being allowed to cool down
for approx. 30 seconds.
5. POURING OUT THE WATER
FIG. 9
• Remove the kettle from the power base
and pour out the hot water (9).
Note
As a result of its functioning, some water
can condense out of the outlet openings
in the base of the kettle and run out over
the edge of the power base. This is
normal and is perfectly harmless.
If the kettle is returned to the power
base, any water left in it will only heat up
if the kettle is switched on again.
6. REMOVE SCALE FILTER
FIG. 10 / FIG. 11
Before removing the scale filter, first remove
the kettle from the power base and allow to
cool down. Never remove the scale filter
while the kettle is still hot or still full of
water. Simply pull the scale filter upwards
(10).
When replacing the filter, ensure that the
scale filter is located properly in its guide
(11). Press the scale filter down fully into the
body.
Note
Never leave the scale filter loose in the
kettle.

7. CLEANING AND MAINTENANCE

• Remove the kettle from the power base
and allow it to cool down each time
before cleaning. Disconnect the plug
from the mains.
• Never immerse the appliance or the
power base in water and never use
highly corrosive or abrasive cleaning
agents.
• Wipe out the kettle and power base with
a damp cloth. Rinse out the inside of the
Página 8
kettle with water. Remove stubborn
stains with washing up liquid.
• To get the best results at all times, make
a regular check to see if there are
particles of scale in the scale filter. Rinse
the scale filter under running water and
use a soft brush if necessary (no metal).
The kettle must be descaled regularly. At
the latest, the kettle should be descaled
when the time required to boil water is
markedly longer or if it cuts out too soon
while heating the water.
Method:
Fill the kettle up the maximum filling level.
Close the lid. The safety lid must click into
place. Connect the power base to the mains
and put the kettle on the power base.
Switch on the kettle. The kettle switches off
automatically once it has boiled the water.
Use any standard descaler (follow the
instructions for use given by the maker).
Allow the de-scaling agent to take effect for
at least 30 minutes. Afterwards, rinse out
the appliance several times with clean water
and then boil again with clean water which
should then be poured away.
Repeat the process if the kettle is heavily
scaled.
9. WASTE ELIMINATION
When the appliance is no longer useful, you
should cut its cord to put it out of action and
dispose of it using a suitable waste
elimination procedure. For further information
on this matter, consult your local authorities.
9
8. DE-SCALING
The materials used in the
packaging, product and
accessories can be recycled.
Correct separation of waste
materials will allow recyclable
materials to be re-used.