Electrical Connection; Testing; Warranty; Package Contents - LINDR PYGMY 20 Green Line new Instrucciones De Uso

6. ELECTRICAL CONNECTION:

Connect the device to a power socket in ac-
cordance with specifications on the machine
plate of the device. Electrical wiring is subject
to local regulations. If the power leads (ca-
bles) are damaged, they must be replaced by
the manufacturer, their service technician or
a similarly qualified person to prevent risk of
hazardous situations.
DANGER: Do not use or turn on the device
if the power lead cable is damaged!

7. TESTING:

The product is delivered ready for immediate
use.

8. WARRANTY:

The device comes with a warranty in accord-
ance with general legal regulations of the
Czech Republic or in accordance with the
trade agreement. During the validity period
of the warranty, we will remove any defects on
the product free of charge, provided these de-
fects were not caused by excess wear, improp-
18
er handling, incorrect storage or by using the

9. PACKAGE CONTENTS

1. Tap (Packaging of the two-tap device contains 2 taps.)
2. Drip tray
3. Tap wrench

10. TAP INSTALLATION

1. Turn the compensator lever (1.), so that it points down (see figure). The compensator lever on
the tap is used to adjust the flow rate.
2. Fit the tap perpendicularly onto the spline.
3. Secure with a flare nut and turn left. (Loosen to the right).
4. Tighten with the enclosed wrench.

11. KEG COUPLER ASSEMBLY

11.1 Outlet for Keg Pressurisation
Variant of connection with the use of a bushing; the hose is fitted onto the bushing and affixed
with a clip.
WARNING: Before you screw the speed fitting onto the 5/8" thread, make sure the keg
coupler (air inlet for delivery medium) has a lip valve (check valve 11.A) fitted on it.
:
(see Fig. 9.)
:
(see Fig. 10.)
:
(see Fig. 11.)
product in a way that is counter to the instruc-
tion manual or the product's design as defined
by the manufacturer. Materials replaced dur-
ing the validity period of the warranty are our
property. The legitimacy of the warranty claim
is always decided by an authorised service
centre. Warranty provided by a retailer outside
of the territory of the Czech Republic is gov-
erned by the agreement between the retail-
er and the buyer in their mutual relationship;
this agreement is not directly linked to the
manufacturer. The agreement does not give
the buyer the right to submit warranty claims
to the manufacturer. Transport expenses or
other costs are not covered by the warranty.
ATTENTION:
Electrical devices and appliances must be
checked/inspected at a time stipulated by
valid legislation of the country the device
is operated in. Inspection of wiring may
only be done by a person with valid au-
thorisation for this activity. Service work,
provision of spare parts and inspection is
done by the manufacturer or an author-
ised service centre.