Playback; Playback Mode; Scene Playback; Manual Scene Playback - Chauvet DJ Obey 40 Manual Usuario

5. P
LAYBACK

Playback Mode

Scene Playback

Manual Scene Playback

Obey 40 User Manual Rev. 8
Playback is used to play back saved scenes and chases. It is the mode to use when the
show is happening. In playback mode the saved scenes and chases are triggered to play
back. There are 4 playback types.
· Scene Playback - scenes can be triggered manually and automatically with timing set by
the <Speed Time> and <Fade Time> faders, the <Tap Sync/Display> button, or by
music.
· Chase Playback - chases can be triggered automatically, with timing set by the <Speed
Time> and <Fade Time> faders, the <Tap Sync/Display> button, or music.
· Live Playback - "on the fly" playback is live control of the lights, identical to programming
lights, but the looks are not saved.
· MIDI playback - scene and chase playback is triggered by MIDI input inputt the board.
It is possible to use all four playback types at once.
Scene playback triggers a specific scene or scenes for playback. A scene can be triggered
manually by pressing a scene button, and it will stay selected until another scene is
triggered. Scenes in a bank can be played one after another in a loop with timing set by the
<Speed Time> and <Fade Time> faders, or the <Tap Sync/Display> button, or by music.
The LCD display shows the current scene.
· The scenes play back in number order within a bank.
· Only one bank can be played back at a time.
· Only programmed scenes will play back.
· Empty scenes will be skipped during playback.
Manual scene playback is triggering a single scene by pressing the scene button. The
general instructions for manual scene playback are as follows:
1. Make Auto Trigger or Music Trigger type playback is not selected.
2. Use the bank buttons to locate the bank of the scene that will be triggered.
3. Press the scene button. The lights will show the programmed scene.
The specific instructions below describe how to play back <SCENES 2> in bank 2 and then
<SCENES 8> in bank 4.
1. Make sure that Auto Trigger and Music trigger type playback are not selected by
checking the LCD display to see if the AutoTrigger or the MusicTrigger indicators are on.
See LCD Display for more information.
2. If the AutoTrigger indicator is on, press <Auto/Del>. The indicator will go off.
3. I the MusicTrigger indicator is on, press <Music/Bank Copy>. The indicator will go off.
4. Press <Bank Up> or <Bank Down> until 2 shows in the LCD display just above the
word Bank.
5. Press <SCENES2>. The lights show <SCENES 2>.
6. Press <Bank Up> or <Bank Down> until 4 shows in the LCD display just above the
word Bank.
7. Press <SCENES 8>. The lights show <SCENES 8>.
Page 29 of 160