Technical Information; Maintenance; Technical Specifications - Chauvet DJ Obey 40 Manual Usuario

6. T
ECHNICAL

Maintenance

Technical
Specifications
Page 34 of 160
I
NFORMATION
To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency. As a
general rule, fixtures should be cleaned at least twice a month. Dust build-up reduces light
output performance and can cause overheating. This can lead to reduced lamp life and
increased mechanical wear. Be sure to power off fixture before conducting maintenance.
1. Unplug product from power.
2. Use a vacuum or air compressor and a soft brush to remove dust collected on external
vents.
3. Clean all lenses when the fixture is at room temperature with a mild solution of glass
cleaner or isopropyl alcohol and a soft lint-free cotton cloth or lens tissue.
4. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens.
5. Gently polish optical surfaces until they are free of haze and lint.
Always dry the parts carefully after cleaning them.
WEIGHT & DIMENSIONS
Length
Width
Height
Weight
Power
Auto-ranging external power supply
Power consumption @ 120 V
Power consumption @ 230 V
INDOOR/OUTDOOR
Rating
Thermal
Maximum ambient temperature
Control & Programming
Data output
Data pin configuration
Total DMX control channels
Ordering Information
Obey 40
WARRANTY INFORMATION
Warranty
19 in (483 mm)
3.5 in (89 mm)
6.7 in (171 mm)
5.7 lb (2.6 kg)
100–240 VAC, 50/60 Hz
<1 W (500 mA) max, 0.2 A inrush
<1 W (500 mA) max, 0.2 A inrush
For indoor use only
104 °F (40 °C)
3-pin XLR
pin 1 ground, pin 2 (-), pin 3 (+)
192
OBEY40
2-year limited warranty
Obey 40 User Manual Rev. 8