Overview - Speedaire C041G Manual Del Propietário

Speedaire Operating Instructions

Overview

Tool Pressure Gauge
Indicates the outgoing air pressure
to the tool and is controlled by
the regulator.
Quick Connect
Offers a quick release feature for
attaching and removing the
air hose.
Air Intake Filter (not visible)
Provides clean air to the pump and
must always be kept free of debris.
Check on a daily basis or before
each use.
Tank Drain Valve
Used to drain condensation from
the air tank. Located at bottom
of tank.
Regulator
The air pressure coming from the
air tank is controlled by the
regulator. To increase the pressure,
turn the knob clockwise, and to
decrease the pressure, turn the
knob counterclockwise.
7
Tank Pressure Gauge
Indicates the reserve air pressure
in the tank.
Power Switch
This controls the power to the
motor and also the cut-in/cut-out
pressure settings. This switch
serves as the Auto-On/Off
positions for the unit.
Check Valve (not visible)
When the pump is not in operation
the valve closes to retain air
pressure inside the tank. An
internal component.
Tank Safety Valve (not visible)
Used to allow excess tank
pressure to escape into the
atmosphere. This valve should
only open when the tank pressure
is above the maximum rated
pressure.
E
N
G
L
I
S
H