Chevrolet Corvette 1997-2004; Chevrolet Lumina 1995-2001/Monte Carlo 1995-1999 - Metra 99-3300 Instrucciones De Instalación

Chevrolet Corvette 1997-2004

1. Using the panel removal tool, pry out
the ride control switch and unplug the
connectors.
2. Unsnap the switch trim and remove (2)
10mm hex-head bolts exposed.
3. Open the center console door and
extract (4) Phillips screws from the inner
hinge, and then remove the door.
4. Open the ashtray and remove (1) Phillips
screw exposed.
5. Remove the ashtray and extract (1)
Phillips screw exposed.
6. Unclip the small grille to the left of the
ignition switch and remove (1) screw
exposed.
7. Using the panel removal tool, gently unclip
and remove the the radio trim bezel.
8. Remove (2) 9/32" screws securing the
factory radio, disconnect the wiring, and
then remove the radio. (Figure A)
Continue to Kit Assembly
4
DASH DISASSEMBLY
1
(Figure A)
Chevrolet Lumina 1995-2001/
Monte Carlo 1995-1999
1. Using the panel removal tool, gently
unclip and remove the dash trim bezel.
Note: It may be necessary to loosen the
knee bolster.
2. Remove (2) 7mm hex-head screws
securing the factory radio, disconnect
the wiring and then remove the radio.
(Figure A)
Continue to Kit Assembly
(Figure A)
|
386.257.1187 MetraOnline.com