3. Locate the password jumper (PSWD) on the system board.
NOTE:
For more information on the location of the jumper, see
"System-board
components".
4. Remove the jumper plug from the password jumper-pins.
5. Wait for 5 seconds and then replace the jumper plug in its original location.
6. Rotate the side-chassis towards the computer until it snaps into place.
Requisitos posteriores
1. Coloque el
embellecedor
frontal.
2. Vuelva a colocar la
cubierta del
equipo.
Programa de configuración del BIOS
53