LG UPSE3024ST Manual Del Propietário página 54

Symptoms
• Aluminum foil used on the broiling pan and grid has not been fitted properly and
Food does not broil
properly
• In some areas the power voltage may be low.
• Oven sensor needs to be adjusted.
Oven temperature too
hot or too cold
• Coarse particles such as salt or sand between cooktop and utensils can cause
Scratches or
abrasions on cooktop
• Cleaning materials not recommended for glass-ceramic cooktop have been
surface
• Cookware with rough bottom has been used. Use smooth, flat-bottomed
• Scraping of metal utensils on cooktop surface. Do not slide metal utensils
Metal marks
Brown streaks or • Boilovers are cooked onto surface. Use a blade scraper to remove soil. See
specks
Areas of discoloration • Mineral deposits from water and food. Remove using a glass-ceramic cooktop
on cooktop
• The oven temperature is too high to set a Self Clean operation.
Oven will not Self
• Oven controls improperly set.
Clean
• A Self Clean cycle cannot be started if the oven lockout feature is active.
• This is the sound of the metal heating and cooling during both the cooking and
"Crackling" or
"popping" sound
• A convection fan may automatically turn on and off.
Fan noise
• Convection fan stops during a convection bake cycle.
Convection Fan stops
• This is normal. This means that the product has just been plugged in, or that it
Displayed colon in the
clock is flashing
• Excessive soil.
Excessive smoking
during a Self Clean
cycle
All manuals and user guides at all-guides.com
Possible Causes / Solutions
slit as recommended.
- See the Using the Oven section.
- Preheat the broil element for 5-7 minutes.
- See the Broiling Guide.
- See Oven Temperature Adjustment in the Features section.
scratches. Be sure the cooktop surface and bottoms of utensils are clean before
using. Small scratches do not affect cooking and will become less visible with
time.
used. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section.
cookware.
on cooktop surface. Use a glass-ceramic cooktop cleaning creme to remove
the marks. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE
section.
Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section.
cleaning creme. Use cookware with clean, dry bottoms.
- Allow the range to cool and reset the controls.
- See the Self Clean section.
Self Clean functions.
- This is normal.
- This is normal.
- This is normal and is done to allow for more even heating during the cycle.
This is not a failure of the range and should be considered normal operation.
has experienced a power interruption. Press Cook Time for three seconds and
reset the clock, or press any key to stop the flashing.
- Turn the oven mode knob to the Off position. Open the windows to rid the
room of smoke. Wait until the Self Clean mode is cancelled. Wipe up the
excess soil and reset the clean.
TROUBLESHOOTING 53