Selecting Broadcast (Air) Or Cable Tv (Cable) For Channel Setting; Saving Broadcast Tv Channels In The Memory (Channel Search) - Sharp IT-23M1U Manual De Funcionamiento

Selecting broadcast (AIR) or cable
TV (CABLE) for Channel Setting
It is necessary to set the receiving mode to "AIR" or
"CABLE" channels to receive locally broadcast TV
programs.
1. Display the CHANNEL SETTING menu. (See
page E22.)
2. Press the buttons to select "AIR/CABLE",
and press the ENTER button.
3. Press the buttons to select the desired
mode ("AIR" or "CABLE"), and press the ENTER
button.
If you select "CABLE":
(1) Press the buttons to select "CABLE
MODE", and press the ENTER button.
(2) Press the buttons to select the desired
mode ("STD", "HRC" or "IRC").
4. Press the MENU button to exit the screen.
IT-23M1U_gb_01.P65
All manuals and user guides at all-guides.com
Setting TV channels
E23
23
Saving broadcast TV channels in the
memory (CHANNEL SEARCH)
"CHANNEL SEARCH" allows you to search
through available channels ("AIR" or "CABLE") in
your area.
The tuner saves them to TV memory automatically.
1. Display the CHANNEL SETTING menu. (See
page E22.)
2. Press the buttons to select "CHANNEL
SEARCH", and press the ENTER button.
CHANNEL SEARCH
2
AIR
3. Press the ENTER button.
The tuner will search through all available
channels in your area and save them to the TV
memory.
Note:
- To interrupt Channel Search, press the MENU
button. Channel Search will stop at the current
channel and will not save any higher
channels.
4. When Channel Search completes, the MENU
screen becomes off and TV screen becomes
minimum channel of TV memory.
If TV memory is empty, TV channel will be CH 2
(AIR and CABLE: STD) or CH 1 (CABLE: HRC
and IRC).
Notes:
- Searching channels are:
AIR channels:
VHF: 2 through 13
UHF: 14 through 69
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
- During Channel Search, the monitor will change
channels automatically.
- When Channel Search completes, all channels,
which were set previously, will be erased.
- If you search for channels but cannot receive
any, TV memory becomes empty.
2004/08/20, 10:42
< >
TV/AV