Parweld XR1052 Manual De Instrucciones página 8

Controls
Mode Switch
When grinding, Select GRIND on the MODE switch.
When welding, select one off two positions on the MODE switch
corresponding to the shade range required; Shade 4 through to 8
or shade 9 through to 13.
Shade Control
When the mode switch is in the lower position, 9 - 13, the SHADE
control knob adjustment most be set to correspond with the shade
required on the scale between 9, 10, 11 12 and 13.
When the switch is in the mid position. 4 - 8, the SHADE control
knob adjustment most be set to correspond with the shade
required on the scale between 4, 5, 6, 7 and 8.
Choose the correct shade number based on welding amperage and process.
If the shade of fi lter is too dark or too light, adjust the SHADE control knob slightly
until you can see the welding spot and molten weld pool without glare, or excessive
brightness.
Warning: You can damage your eyes if using the welding helmet with incorrect
shade selected (Too light or too dark) for long periods of time.
Recommended Shade Numbers
0.5
WELDING PROCESS
Covered Electrodes
MIG Plate Welding
MIG Sheet Welding
TIG
MAG
Arc Gouging
Plasma Cutting
Plasma Welding 4
8 | English
1 2.5 5 10 15 20 30 40 60 80 100 125 150 175 200 225 250 275 300 350 400 450 500
Shade 9
Shade 9
5 6 7 8 9 10
CURRENT AMPERES
10 Shade 11
Shade 10 Shade 11
Shade 10 Shade 11
10 Shade 11 Shade 12
Shade 10 11 12
Shade 10
Shade 11
11 Shade 12 Shade 13
XR1052 / XR939H
Shade 12 Shade 13
Shade 12 Shade 13
Shade 12 Shade 13 Shade 14
Shade 13
Shade 13 Shade 14
11 12 13 14
Shade 12
Shade 14
14
14
15
Shade 14
15
15
Shade 13
15