How To Use Washer - Jocel JLR013989 Manual De Instrucciones

HOW TO USE WASHER

Before washing clothes for the first time, you must run a complete cycle without
clothes. To do these:
1. Connect the power and turn on the tap.
2. Press the button "
Touch the " " button.
3.
It can remove the water out which left in the tub because of
manufacturer's checking out.
4. Washing preparation
1. Connect the inlet hoses well and turn on the tap.
2. After making sure the power socket is grounded reliably, insert the power
plug into the power socket.
3. Place the drain hose well.
5. Preparation of clothes
1. Sort the laundry by colour and by care label.
Most garments have a textile care label in the
collar or side seam.
2. Make sure all the pockets are empty, Foreign
objects (e.g., nails, coins, paper clips, etc.) can
cause damage to garments and components in
the machine.
3. Close any zips, fasten hooks and eyes etc
before washing.
4. Dark textiles often contain excess dye and
should be washed separately several times
before being included in a mixed load. Always
wash whites and coloureds separately.
5. Badly soiled areas, stains etc. should be pre-
treated with liquid detergent, stain removers etc.
6. Turn over the clothes which pill easily and is
with woolen surface before putting them into the
machine.
6. Put clothes into the washer
Unfold the laundry and load loosely in the drum.
Mixing both large and small items give better wash
results and also helps distribute the load evenly during
spinning. The most efficient use of energy and water is
achieved when a full load is washed. However, do not
overload as this causes creases and reduces cleaning
efficiency.
Make sure that no garments are nipped between the door and the
seal.
" to turn on the machine and choose the program
60
20ºC.