Dystrybucja systemów Jablotron: MBS SYSTEMS s.c.
3. How can the Nanny be used for twins?
Answer:
Each of the twins must have his own crib without any physical contact between them. Each
baby must have his own independent Nanny system. It is not possible to use two separate sensor
pads connected to one control unit because the movement from one twin would be detected and
prevent any potential breathing difficulties being detected from the other twin.
4. Is it possible to use the Nanny in a cradle (swinging), pram or Moses basket?
Answer:
It is only possible to use the Nanny in a pram if the pram is not moving and is not being touched
by anyone. It needs to be positioned in a quiet place away from environmental vibrations. The same
conditions apply for cradles and Moses baskets.
5. Why is there a low battery warning just after switching on the device?
Answer:
Ensure that you have not used rechargeable batteries as their voltage is lower and therefore
false alarms are triggered. Only use alkaline batteries in the device.
6. Why doesn't the device work properly anymore?
Answer:
This can be caused by a damaged cable or its connector. It could be the result of pulling,
possibly by the baby, or the cable not being attached to the crib in accordance with the instruction
outlined in this manual. Another reason could be damage to the pad caused by careless handling
(dropping it on the floor, bending etc).
Solution:
Contact the JABLOTRON ALARMS a.s. service department.
7. What should I do if the Nanny is faulty?
If you are experiencing any difficulties with the device, please contact our technical support team
before contacting your retailer. The difficulties are often caused by incorrect installation or use of the
device. All the installation and correct usage instructions can be found within this manual. Beyond
this, we are happy to help with any problems you may be experiencing. If however there is a techni-
cal defect in your device, we will try to find the best and fastest solution to suit you so you won't be
without your Nanny for too long.
Power
Stand-by consumption
Average battery life time
Recommended weight of baby
Sensor pad
Control unit
Working environment
Storage environment
Lifetime of the product
Contents:
sensor pad, control unit, extension cable, splitting connector and plastic wall mount holder.
Conformity assessment was done by Notified Body No.1014.
It has also been registered by the Ministry of Health Care in the Czech Republic.
ALARMS a.s., hereby declares that the BM-02 is in compliance with the essential requirements
and other relevant provisions of Directive
can be found on the web page www.jablotron.com, technical support section.
Note:
Dispose of batteries safely depending on the type of the batteries and local regulations. Although
this product does not contain any harmful materials we suggest you return the product to the dealer
or directly to the manufacturer after use.
B M -0 2 Na n n y Ba by Re spir at io n Mo n ito r
S P E C I F I C A T I O N S
3 V, 2 x 1.5 V AA size alkaline batteries
0.2 mA
6 months (frequent testing makes it shorter)
from min. 2 kg to max. 15 kg
model BM-02D, size max. 305 x 500 x 15 mm,
weight 1 500 g, made of PVC-P
size max. 140 x 80 x 35 mm, weight 150 g,
made of ABS
+5 °C to +35 °C, rel. humidity 30 % to 75 %
0 °C to +40 °C, rel. humidity 10 % to 85 %
2 years
1993/42/EC. The original of the conformity assessment
nanny@jablotron.cz
www.nanny.cz
16
www.sklep-jablotron.pl
JABLOTRON
M F V 5 21 04 N AV- 03 2.0 4