Insert Batteries - TFA JOKER 30.3055 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
TFA_No. 30.3055_Anleitung_12_16
JOKER - Wireless thermometer
D: Outdoor transmitter (Fig. 3):
Display:
D 1:
Channel number
D 2:
Temperature
Housing:
D 3:
Wall mounting hole
D 4:
Battery compartment
6. Getting started

6.1 Insert batteries

• Place both instruments on a desk with a distance of
approximately 1.5 meter. Avoid getting close to possible
interference sources (Electronic devices and radio installa-
tions).
• Open the battery compartment of the transmitter by
pressing the notch with your thumb and then lift the
cover.
• Insert two new batteries 1,5 V AAA polarity as illustrated.
• Close the battery compartment again.
• Open the battery compartment of the basic station and
insert two new batteries 1.5 V AAA, polarity as illustrated.
• All LCD segments will be displayed for about a few se-
conds.
• Close the battery compartment again.
6.2 Reception of outdoor temperature
• After the batteries are inserted the outdoor temperature
will be transmitted automatically to the basic station.
• The reception symbol appears on the upper display. The
basic station will scan the outdoor temperature.
• If the reception of the outdoor temperature fails, "- -"
appears on the display. Check the batteries and try it
again. Check if there is any source of interference.
• You can start the initialization manually. Hold the
ton on the basic station for three seconds.
6.3 Display
• The upper display shows the outdoor temperature.
• The lower display shows the indoor temperature.
14
23.12.2016
11:44 Uhr
JOKER - Wireless thermometer
6.4 Store and reset maximum and minimum values
• As soon as the basic station and the outdoor transmitter
• Press and hold the
• During a manual transmitter search all maximum and
6.5 Backlight
• Press the
7. Positioning and fixing of the basic station and the
• With the foldable leg at the back of the basic station, the
• With the hanging hole at the back of the outdoor trans-
• Check the transmission of the signal from the outdoor
• If necessary choose another position for the outdoor
8. Care and maintenance
but-
• Clean the devices with a soft damp cloth. Do not use sol-
• Remove the batteries if you do not use the devices for a
• Keep the devices in a dry place.
Seite 8
are active the maximum and minimum values for indoor
and outdoor will be stored.
button and the recorded maximum
or minimum values will be reset to the actual values.
minimum outdoor values will be also reset to the current
values.
button or the
light for few seconds.
outdoor transmitter
basic station can be placed onto any flat surface or wall
mounted at the respective location by the hanging hole
at the back of the basic station. Avoid the vicinity of any
interfering field like computer monitors or TV sets and
solid metal objects.
mitter, the outdoor transmitter can be wall mounted at
the respective location. Choose a shady and dry position
for the outdoor transmitter. (Direct sunshine falsifies the
measurement and continuous humidity strains the elec-
tronic components needlessly).
transmitter to the basic station (transmission range of up to
100 m free field). Within ferro-concrete rooms (basements,
superstructures), the received signal is naturally weakened.
transmitter and/or basic station.
vents or scouring agents.
long period of time.
button to activate the back-
15

Publicidad

Tabla de contenido
loading

Tabla de contenido