Kaiser+Kraft K609 192 Instrucciones De Servicio página 34

4. NEVER USE THE UNIT ON SLOPES.
5. ENSURE THAT PARTS OF THE BODY BECOME CAUGHT IN
THE LIFTING MECHANISM, UNDER THE FORKS OR UNDER
THE LOAD. NE VER TRANSPORT PEOPLE ON THE UNIT.
6. THE OPERATOR SHOULD WEAR GLOVES AND SAFETY
SHOES FOR HIS OR HER OWN SAFETY.
7. NEVER TRANSPORT UNSTABLE OR LOOSELY STACKED
OBJECTS.
8. NEVER OVERLOAD THE UNIT.
9. NE VER LOAD THE PLATFORM ON ONE SIDE OR MAKE IT TOP-
HEAVY OR PLACE LOADS THAT STICK OUT OVER THE EDGE
OF THE PLATFORM.
10. THE CAPACITY OF THE UNIT ASSUMES THAT THE
LOAD
TRANSPORT WITH THE CENTRE OF GRAVITY IN THE
CENTRE OF THE FORKS AT THE FRONT.
11. ENSURE THAT THE LENGTH OF THE FORKS IS THE
SAME AS THE LENGTH OF THE PALLET.
12. LOWER THE FORKS AS FAR AS POSSIBLE WHEN THE UNIT IS
NOT IN USE.
This pallet truck lifting by both manual and electric, lowering by manual.
II. When to add oil
If the fork can't be pumped up to its rated highest position, you may have to add
hydraulic oil into the oil tank. The hydraulic fluid to be used must have a quality of
ISO VG32 or equivalence, its viscosity should be 1,5 – 3,5. Mixing of different fluids
is prohibited!
III. Inspection and maintenance instructions
Safety warning
Before inspection and maintenance work is carried out, appropriate measures
should be taken to remove all loads from the electric high-lift pallet truck.
Maintenance and inspection work
Check operating elements for faultless operation.
Check condition of the travelling rollers and roller axles
Grease joints and bearings
Check functioning of wheels and rollers
Subject to change without notice
WILL BE PERFECTLY BALANCED FOR
Inspection intervals
daily or each time
before use
monthly
2