Assembly Of External Irrigation System - Nouvag MD 30 Instrucciones De Uso

8. Insert the spike at the beginning of the tubing set into the irrigation fluid bottle and hang the bottle
onto the stand.
9. Open the roller clamp on the tubing set as far as it will go.
10. Open the bleed valve beneath the drip chamber.
11. Connect the control unit to the power socket.
Ensure that the operating voltage setting corresponds to the local mains voltage.
6.4

Assembly of external irrigation system

A
Art. No.: 1873 A
B
C
8
All manuals and user guides at all-guides.com
8
A) Secure motor cable clips and handpiece clips to the
Art. No.: 1881
B) Connect the 6 cm section of tube (optional, Art. No.:
C) Secure clips to the contra angle and to the motor
D) If required, secure additional clips to the motor cable.
C
9
irrigation tube.
1773) with the external cooling tube of the contra
angle.
cable.
MD 30 Operating Instructions, Art. No. 31686, V45/12
MD 30
10